Wall-mounting the Samsung 9000 Series 3D LED TV can be done right out of the box. All the accessories are included. The only extras you’ll need are an assistant to help move it and a screwdriver or power drill. The Samsung 9000 Series’ ultra slim wall mounting kit even includes hardware and instructions for mounting your TV to various wall types.
After unpacking the Samsung 9000 3D LED TV, use the top styrofoam packing insert as a support base. With an assistant to help you, lay the TV face down. If you don’t have the styrofoam insert, we recommend using a soft blanket or comforter on a table wide enough to support the width of the TV. Now remove the back cover by holding the bottom and gently pulling up. This will reveal ten screws. Loosen and remove the screws and slowly detach the pedestal from the TV panel then place it aside.
Now with the pedestal removed, unscrew and remove the four mounting stud caps on the back of the Samsung 9000 Series panel. Use the mounting studs from the bag labeled E and screw them into the eight holes. The next step is to remove the connection panel from the pedestal. On the bottom of the pedestal, you will see eight screws around the edge and two in the middle. Remove all ten of the screws and carefully detach the connection panel from the pedestal. Keep the eight screws together as you will need them a little later. For safekeeping, you can attach the two middle screws back to the pedestal.
Now, take the connection panel with the inputs directed toward the top of your Samsung 9000 Series 3D TV LED and gently lay it into place making sure the holes line up with the mounting studs. Then use the eight screws you removed from the bottom of the stand and secure them into the mounting studs. To avoid over-tightening the screws, we recommend you do not use a power drill.
Once the connection panel is attached, you can attach the Samsung 9000 Series ultra slim wall mount. The ultra slim wall mount bar comes attached so just remove the two screws on each end to secure the ultra slim wire mount. Use the two screws in the bag labeled C to attach the ultra slim wire mount to your Samsung 9000 Series 3D LED TV. Now find the two kick stands provided and fasten them to the back of the connection panel with the supplied screws in the bag labeled D.
Finally, with an assistant, slowly lift the TV and hang it as you would a picture frame, making sure the ultra slim wire mount catches the ultra slim wall mount anchors. Before you release the TV, make sure the wire mount is fitting properly around both wall anchors.
Watch the video to see how to do it: